S60 L5-2.4L VIN 64 B5244S6 (2003)
Connecting Rod: Specifications
Connecting Rods
Diameter, bearing recesses
Big end..................................................................................................................................................................................................53.000 - 0/+0.013 mm
Small end........................................................................................................................................................................................21.000 +0.005/+0.011 mm
Maximum ovality in the bearing recesses..................................................................................................................................................................000.6 mm
Length
Big end - Small end......................................................................................................................................................................................................147 mm
Assemble the connecting rod. Check that the cover is facing the correct direction.
Tighten..........................................................................................................................................................................................................................20 Nm.
Connecting rod cover
Tighten in two stages:
Tighten...........................................................................................................................................................................................................................20 Nm
Angle-Tighten..........................................................................................................................................................................................................90 degrees
Connecting rod cap
Connecting rod with treated toothed surface between the connecting rod and cap, screw with waist
Stage 1............................................................................................................................................................................................................................20 Nm
Stage 2 angle-tighten................................................................................................................................................................................................90 degrees
Connecting rod with fracture surface between the connecting rod and cap, fully threaded screw
