S60 L5-2.4L VIN 64 B5244S6 (2003)
Use camshaft adjustment tool:
Install camshaft adjustment tool 999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool at the
rear of the camshafts.
Remove:
-
the plug at the front edge of the variable valve timing (VVT) unit (TORX 55).
Note! Collect any oil spillage when removing the plug using paper
-
the centre screw in the variable valve timing unit (TORX 55). Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit.
Replacing the camshaft seal
Carefully press in tool 999 5651 Extractor See: Tools and Equipment/999 5651 Extractor between the sealing ring and the camshaft.
Carefully pry out the seal.
Cleaning
To clean the shaft journal and mating surface, use emery cloth P/N 951 1024.
Note! When cleaning work around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other
contaminants are completely removed before the new sealing ring is installed.
Oil the new seal. Install the new seal on the camshaft. Use drift 999 5718 Drift See: Tools and Equipment/999 5718 Drift.