S60 L5-2.4L VIN 64 B5244S6 (2003)
Front Crankshaft Seal: Service and Repair
Oil pump / crankshaft seal, front, replacing
Special tools:
999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold
998 6187 UNIVERSAL PULLER 100 See: Tools and Equipment/998 6187 Universal Puller 100
999 5919 PULLER See: Tools and Equipment/999 5919 Puller
999 5455 PUNCH See: Tools and Equipment/999 5455 Punch
999 5747 Socket See: Tools and Equipment/999 5747 Socket
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
Note! If the oil pressure is low or if there is possibly a fault with the oil pump, measure the oil pressure according to: Service information
Section: 2 (21).
Remove engine components
Caution! Remove the ignition key.
Remove
-
the cross stay between the suspension turrets
-
the upper timing belt cover
-
the servo reservoir and expansion tank. Lift them up and place them on top of the engine
Warning! Ensure that no power steering fluid is spilled. Extremely flammable.
-
the auxiliaries belt
-
the front timing belt cover.
Position the engine according to the marking