S60 L5-2.4L VIN 64 B5244S6 (2003)
Timing Belt: Service and Repair
Belt Drive, Assembly
Belt drive, assembly
Special tools:
999 5747 Socket See: Tools and Equipment/999 5747 Socket
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Installing the water pump
Install the rear timing cover.
Screw into place at the three mounting points.
Install the water pump with a new gasket.
Apply thread sealant, P/N 11-61 056, to all the screws for the water pump. Tighten crosswise.
Installing the oil pump
Use a new gasket and a new O-ring around the oil pump housing.
Screw sliding sleeve 999 5747 into place at the front of the crankshaft journal.
Press in the pump over the sliding sleeve.
Install new screws as a guide.
Carefully tap in the oil pump with a rubber mallet.
Tighten the oil pump crosswise. Tighten to 10 Nm.
Remove sliding sleeve 999 5747.
Installing the crankshaft timing gear pulley