S60 L5-2.4L VIN 64 B5244S6 (2003)
Exhaust Manifold: Service and Repair
Exhaust manifold / gasket, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removing manifold / gasket
Remove
-
the screw for the engine stabilizer brace
-
the screws for the mounting for the engine stabilizer brace at the right-hand suspension turret
-
the heat deflector plate over the manifold.
Place the air preheating hose to one side.
Remove
-
the left front wheel
-
the clamp for the mounting for the heated oxygen sensor wiring at the steering gear
-
the splash guard under the engine.
Release the wiring for the heated oxygen sensor (HO2S) from the rear engine mounting
-
the nuts at the junction of the manifold and the front exhaust pipe.
