S60 L5-2.4L VIN 64 B5244S6 (2003)
Install Glove compartment, replacing, B5244T5, B5254T2 See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
Carry out self-adjustment of the damper motor's end position. This is carried out in VIDA Vehicle communication.
R.H.D.
Damper motor, floor/defroster, replacing
Removal
Remove Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Soundproofing Panel, Replacing
Remove the following items:
-
screws
-
engine
-
connector
Installation
Position the motor
Turn the shaft on the motor so that the shaft journal goes in.
Install the following items: