S60 L5-2.4L VIN 64 B5244S6 (2003)
Position the motor.
Turn the shaft on the motor so that the motor can be positioned.
Install:
-
the screws
-
the switch.
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.
Install the glove compartment. See Glove compartment, replacing, B5244T5, B5254T2 See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair.
Damper motor temperature driver's side, replacing
Removing the temperature damper motor, driver's side
