S60 L5-2.4L VIN 64 B5244S6 (2003)
Position the motor.
Install:
-
the lever from the mechanism on the ball on the motor lever
-
the tip of a screwdriver behind the lever on the mechanism and the tip of, for example, a pair of round-nosed pliers behind the lever from the
damper motor. Press the ball into place on the mechanism.
Position the motor.
Tighten it using the screws.
Install:
-
the switch
-
the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing.
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.
