volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Duct|Service and Repair|Page 13275 > < Damper Motor, Floor/Defroster, Replacing|Page 13271
Page 1
background image

Air Duct: Service and Repair

Air ducts and seals, replacing

Removal and Installation

Defroster duct, windshield

When replacing the defroster duct on the windshield, the entire dashboard must be replaced. See Dashboard, replacing See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Dashboard, Replacing.

Installation

-

Install in reverse order.

Air ducts on the B-post in the dashboard

Remove the air ducts from the B-post. See Panel, B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Panel, B-Post, Replacing.
Install. See Panel, B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel, B-Post, Replacing.

The air duct for the dashboard nozzle, side defroster (driver's side)

Remove the dashboard. See Dashboard, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Dashboard, Replacing.

Removal

-

Remove the side defroster nozzle.

-

Remove the combined instrument panel. See Combined instrument panel See: Instrument Panel, Gauges and Warning Indicators/Instrument
Cluster / Carrier/Service and Repair/Combined Instrument Panel , not including the switch

-

Remove the driver's side nozzle.

-

Insert a hand through the opening for the combined instrument panel. Detach the duct from the defroster duct for the windshield

-

Pull the duct out through the opening for the nozzle.

Installation

-

Position the duct and turn it into position

Air Duct|Service and Repair|Page 13275 > < Damper Motor, Floor/Defroster, Replacing|Page 13271