volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Evaporator Temperature Sensor / Switch > < Evaporator Drain Tube|Service and Repair|Page 13666
Page 3
background image

Older version cars

Install the cover for the air cleaner. 
Press the grommet into place.
Push the drainage hose onto the blower fan motor.

Note! The drainage hose is marked by a colored stripe. When installing the marking must be aligned on the blower fan motor cover as
illustrated. This is to avoid twisting the hose.

Reinstall the front floor carpet.
Install the soundproofing panel. 

Newer version cars

Press the grommet into place.
Push the drainage hose onto the blower fan motor.

Note! The drainage hose is marked by a colored stripe. When installing the marking must be aligned on the blower fan motor cover as
illustrated. This is to avoid twisting the hose.

Reinstall the front floor carpet.
Install the soundproofing panel. 

Evaporator Temperature Sensor / Switch > < Evaporator Drain Tube|Service and Repair|Page 13666