volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Expansion Valve, Replacing|Page 13677 > < Evaporator Temperature Sensor / Switch|Locations|Page 13672
Page 1
background image

Expansion Valve: Service and Repair
Expansion Valve, Replacing

Expansion valve, replacing

Expansion valve, replacing

Before starting work on the expansion valve

Warning! Follow the safety instructions for work on air conditioning (A/C) systems. 

Note! Read the instructions covering slow and quick leaks. See Oil in the A/C system See: Refrigerant Oil/Service and Repair 

Note! Always plug the pipes and connections when working on the climate control system.

Removal

-

First read section  Before starting work on the expansion valve

-

Disconnect the battery negative lead. See Battery, replacing See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, Replacing 

-

Drain the refrigerant from the system. 

-

Remove the engine stabilizer brace in the engine compartment. For 5 cylinder engines

-

Remove the engine stabilizer brace in the engine compartment. For 6 cylinder engines

Open:

-

the clamp for the refrigerant pipe on the side member.

Expansion Valve, Replacing|Page 13677 > < Evaporator Temperature Sensor / Switch|Locations|Page 13672