S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove the 4 screws. Use the crankshaft centre nut as a counterhold.
Install the counterhold 999 5433 COUNTERHOLD See: Tools and Equipment/999 5433 Counterhold and remove the center nut.
Remove counterhold 999 5433.
Work the vibration damper loose.
Removing the timing belt
There are two variants of the belt tensioner.
Up to engine number 3188688 the eccentric must be turned clockwise when loosening.
From engine number 3188689 the eccentric must be turned anticlockwise to loosen the belt tension.
Slacken off the centre screw for the belt tensioner slightly.
Hold the center screw in position and, depending on the model, turn the eccentric on the tensioner to 10 o'clock (clockwise) or 2 o'clock (anticlockwise)
using a 6 mm allen key.
Remove the timing belt from the timing gear pulley for the camshafts.
Remove the timing belt.
Removing the crankshaft pulley
Use puller 999 5304 SEPARATOR See: Tools and Equipment/999 5304 Separator and two screws (M8 x 45 mm) with washers.
Pull off the timing gear pulley.