S60 L5-2.4L VIN 64 B5244S6 (2003)
Lift the control module out of the bracket to access the connectors.
Hint: On V70 and V70XC, it may be necessary to angle the control module downwards and forwards to access the connectors.
Disconnecting the connectors
Press the catch (A) and pull the lock handle backwards. Pull the connector out of the control module.
Disconnect the small connector from the control module.
Replace the control module.
Installation
Installing the connectors
Install the large connector on the control module.
Lock the connector using the lock handle above the catch (A).
Install the other connector.
Installing the control module