S60 L5-2.4L VIN 64 B5244S6 (2003)
Fuel Pressure Sensor: Service and Repair
Fuel pressure sensor, replacement
Removal
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Drain the fuel injection system. See Fuel system pressure release See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and
Repair.
Removing the fuel pressure sensor
Caution! Collect any fuel spill using paper or similar.
Remove:
-
the tie strap for the cable for the fuel pressure sensor. Disconnect the connector
-
screw in the fuel pressure sensor
-
the fuel pressure sensor.
Installation
Installing the fuel pressure sensor
Install:
-
the fuel pressure sensor
-
screws for the fuel pressure sensor. Tighten
-
tie strap for the cable harness. Connect the cable to the fuel pressure sensor.