volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5514 > < The Controller Area Network (CAN)|Page 5511
Page 1
background image

Information Bus: Initial Inspection and Diagnostic Overview

Controller Area Network (CAN)

The Controller Area Network (CAN) 

Control Modules In the Control Area Network (CAN) 

Control Modules 

The number of control modules in the CAN varies depending on the level of equipment, the car model and the structure week. The description applies to
the structure week 199815-200149. The structure week and the manufacture week are not necessarily the same week. The week of manufacture is the
week in which the car was manufactured in the factory. The content of the car is guided by the structure week A structure week can extend over many
manufacture weeks. The structure week is specified in the format YYYYWW.

For example, the structure week 199815 indicates that the structure week of the car is week 15 1998.

Explanation 
LS CAN

=

CAN Low speed section (125 Kbps)

HS CAN

=

CAN High speed section (250 Kbps)

Serial

=

Serial communication (Volcano Lite) between the slave control module and the Controller area network (CAN) control
module (10.4 Kbps).

Slave control module =

Accessories installed at the factory to order, when purchasing a new car.

Option

=

Accessories installed at the factory to order, when purchasing a new car.

Accessories

=

Aftermarket installations.

Initial Inspection and Diagnostic Overview|Page 5514 > < The Controller Area Network (CAN)|Page 5511