S60 L5-2.4L VIN 64 B5244S6 (2003)
Canister Purge Control Valve: Service and Repair
Replacing the canister purge (CP) valve
Replacing the canister purge (CP) valve
Removing the canister purge (CP) valve
-
Remove the intake manifold between the front cover plate and the air cleaner (ACL) housing.
-
Disconnect the canister purge (CP) valve connectors.
-
Pull off the valve from the bracket on the fan shroud.
-
Mark up and pull off the hoses from the valve.
Installing a new canister purge (CP) valve
-
Install the hoses according to the marking.
-
Install the canister purge (CP) valve on the bracket on the fan shroud.
-
Connect the canister purge (CP) valve connectors.
-
Install the intake manifold between the front cover plate and air cleaner (ACL) housing.