S60 L5-2.4L VIN 64 B5244S6 (2003)
Drill out the two pop rivets holding the heat deflector plate at the rear mounting for the sub-frame. Use a 5 mm drill bit.
Remove:
-
the two plastic nuts (1)
-
the screw (2)
-
the heat deflector plate.
Drill out the two pop rivets holding the heat deflector plate at the rear mounting for the sub-frame. Use a 5 mm drill bit.
Remove:
-
the two plastic nuts (1)
-
the screw (2)
-
the heat deflector plate.