S60 L5-2.4L VIN 64 B5244S6 (2003)
Leak Detection Pump: Service and Repair
Leak diagnostic unit, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Remove the carbon filter container according to Carbon filter container, replacing See: Evaporative Emission Control Canister/Service and Repair.
Removing the leak diagnostic pump
Remove:
-
the hose from the venting pipe
-
the connector
-
the pump. Pull out the mounting.
Installing the leak diagnostic pump
Connect the hose with the pipe.
Hint: Lubricate the hose using soap solution to facilitate installation.
Connect the connector.
Finishing
Install the carbon filter container. See Carbon filter container, replacing See: Evaporative Emission Control Canister/Service and Repair.