S60 L5-2.4L VIN 64 B5244S6 (2003)
Electronic Brake Control Module: Service and Repair
Replacing the Control Module for ABS and Dynamic Stability and Traction Control (DSTC)
Replacing the control module for ABS and dynamic stability and traction control (DSTC)
Preparation
Disconnect the battery lead
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Preparations for replacement
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing, B5254T2 See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.
Remove the integrated relay / fusebox. Remove the connector for the ABS unit
See Replacing the brake pipe between the hydraulic unit, front wheel and junction , B5254T2 See: Brakes and Traction Control/Hydraulic System/Brake
Hose/Line/Service and Repair/Replacing the Brake Pipe Between the Hydraulic Unit, Front Wheel and Junction.
Removal
Remove the control module
Remove:
-
the pump motor connector
-
the four screws. Use a 6 mm torx external socket.
Carefully lift the control module.
Check the control module
