Workshop Manuals Factory service & repair Volvo
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Volvo S60 L5-2.4L VIN 64 B5244S6 (2003)01 · Relays and Modules
01 · Diagnostics

Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module (Traction Control Module)

Make
Volvo
Model
S60
Engine
L5-2.4L VIN 64 B5244S6
Year
2003
Section
Traction Control Module › Service and Repair › Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module
Relays and ModulesReplacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module · page 1 of 7
Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module (Traction Control Module) – Volvo S60 L5-2.4L VIN 64 B5244S6 (2003)

Traction Control Module: Service and Repair
Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module

Replacing ABS / DSTC (dynamic stability and traction control) control module

Preparation

Removing the battery lead

 Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

Preparations for replacement

Note! There is no need to download software when replacing the ABS control module.

Removing the air cleaner (ACL) housing

 Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe
Master Cylinder / ABS Unit, Replacing.

Removing the integrated relay / fusebox. Remove the connector for the ABS unit

 Brake pipe from hydraulic unit / front wheel / junction, replacing  See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Brake Pipe From Hydraulic Unit / Front Wheel / Junction, Replacing.

Removal

Removing the control module

Remove:

-

the pump motor connector

-

the four screws. Use a 6 mm torx external socket.

Carefully lower the control module.

Checking the control module

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: S60 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2001), S60 2.4 L5-2.4L VIN 61 B5244S (2001), S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004), S60 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006), S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005), S60 L5-2.3L Turbo VIN 53 B5234T3 (2004), S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002).

Parts & tools for this job For 2003 Volvo S60 2.4L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.