S60 L5-2.4L VIN 64 B5244S6 (2003)
Note! The maximum permitted twinned length after splicing is 100mm. This is to prevent interference problems.
Cut the cables so that there is approximately 40 mm between the splices (centre to centre) (A).
Strip the insulation on the 4 cable ends by 5.0 mm. Use pliers 951 2620 Stripping tool See: Tools and Equipment/951 2620 Stripping Tool.
Twin the cable cores on the stripped ends of the cables.
Caution! Ensure that all the cores are twinned.
Crimping the sleeve
