volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reset Procedure|Page 13997 > < Reset Procedure|Page 13995
Page 2
background image

Disconnect the left connector.

Remove:

-

the four screws

-

the contact reel.

Installing contact reel

Install:

-

the contact reel

-

the four screws

-

the connector.

Zero the contact reel. See Contact reel driver airbag module, resetting See: Reset Procedure.
Install the steering wheel. See Replacing the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Replacing the
Steering Wheel (S80/V70/V70XC) or Steering wheel, replacing See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Steering
Wheel, Replacing (S60).
Install the steering column covers. See Replacing the steering column covers, B5244T5, B5254T2 See: Steering and Suspension/Steering/Steering
Column/Steering Column Cover/Service and Repair.

Igniter Wire Connector

Igniter wire connector

Igniter wire connector

If dismantling the contact reel it is very important that the catch function on the connector is released first. Disconnection should be done in line with the
attachment so as not to damage it.

Note! The use of tools of any kind are not advised when disconnecting due to an increased risk of damage to the connector.

Reset Procedure|Page 13997 > < Reset Procedure|Page 13995