S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the two screws from the bracket (2) on the tunnel (the screws will not be reused)
-
Place the end mounting in position, Tighten using both screws (1). Tighten to 25 Nm (19 lbf. ft).
-
Fold up the tab on the firewall
-
Remove the adhesive label covering the hole (2)
-
Install the mounting eyelet (1) using the screws (3) from the kit. Tighten to 25 Nm (19 lbf. ft).
-
Fold the insulation panel and floor carpet back into position so that the mounting eyelets protrude through the stamped grooves in the floor carpet.
-
Reinstall the tunnel panel
-
Reinstall the soundproofing panel
-
Reinstall the sill trim panel.
Baby Insert
Baby insert