volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Caution! The following procedure must be carried out to ensure that the connector and wiring are not damaged when removing the bumper.

Follow the cable from the sensors in the bumper up to the control module for the back-up (reversing) warning system.
Remove the control module for the back-up (reversing) warning system. Disconnect the connector (its cable comes from the bumper).

Note! Disconnect the correct connector. The control module for the back-up (reversing) warning system has 2 connectors.

Removing rear bumper

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Accessory Electronic Module Tailored Reversing Warning System > Page 1491

< PREV PAGE NEXT PAGE >