volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 28
background image

Remove:

-

the guard for the gas tank

-

the connector

-

the two screws

-

slacken off the level sensor and turn the pipe first 180° clockwise and then 180° counter-clockwise. Rotate the level sensor to the correct position
with a magnet

-

the cable.

Installing analog level sensors

Install:

-

the cable

-

the level sensor. Rotate the level sensor to the correct position with a magnet

-

the two screws

-

the connector

-

the guard for the gas tank.

Replacing the Right-Hand Level Sensor and Pump

Replacing the right-hand level sensor and pump

Removal

Note! Since the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Depressurizing the fuel system

Depressurize the fuel system according to,  Fuel system pressure release See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Fuel
Pressure Release/Service and Repair 

Draining fuel tank

Drain the fuel tank according to,  Draining the fuel tank See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair 

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Service and Repair > Left Fuel Gauge Sensor > Page 1833

< PREV PAGE NEXT PAGE >