volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Trouble-Shooting Information|Page 1780 > < Trouble-Shooting Information|Page 1778
Page 2
background image

Was a fault detected?

Yes - Fault Found

No - Checking the resistance of the sensor

-------------------------------------------------

Checking the resistance of the sensor

Check the resistance of both the fuel level sensors. The resistance across each sensor may vary between 12 ohms (full fuel tank) and 383 ohms (empty
fuel tank).

Hint: The resistance of the left fuel level sensor can be measured between terminals #5 and #6 on the connector for the fuel level sensors. The resistance
of the right fuel level sensor can be measured between terminals #6 and #7 on the connector for the fuel level sensors.

Remedy as necessary.

Other information:

-

For further information about signals and other values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters 

-

To access the connector for the fuel level sensors and to replace the fuel level sensors, see Left fuel gauge sensor See: Service and Repair/Left
Fuel Gauge Sensor and Right side fuel pump with level sensor See: Service and Repair/Right Side Fuel Pump With Level Sensor.

Trouble-Shooting Information|Page 1780 > < Trouble-Shooting Information|Page 1778