S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove the steering arm from the wheel spindle
Slacken off the lock nut.
Remove:
-
the steering arm and the lock nut
-
the clamps (1) and (2).
Tape the threads on the inner steering arm to protect the boot when removing.
Remove the boot (3).
Installing the counterhold
Clean the surfaces on the steering rack and the toolthoroughly.
Note! Cleanliness is very important as the seals in the steering gear are sensitive to scratches on the rack.
-
Install counterhold999 7020 Counterhold See: Tools and Equipment/999 7020 Counterhold
-
Tighten to 25 Nm
-
Position the counterhold as close to the limiter as possible. When replacing with a longer limiter, measure the new limiter and position the
counterhold so that there is enough space for the new limiter.
Removing limiter
