volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Limiters, Replacing|Page 12405 > < Tilt Wheel Handle|Service and Repair|Page 12400
Page 1
background image

Steering Gear: Service and Repair
Limiters, Replacing

Replacing limiters

Special tools: 

999 7020
999 7019 

Removal 

Removing limiter

Remove the wheel. 
Clean the boot and the surrounding area thoroughly. 
Measure the distance between the lock nut and the edge of the wrench grip. 
Note the measurement.

Marking

Mark up the ball joint, the lock nut and the tie rod as illustrated.
Front wheel alignment is not necessary if the outer steering arm is secured in the original position.

Removing the outer steering arm and boot 

Remove the steering arm from the wheel spindle 
Slacken off the lock nut. 

Remove: 
-

the steering arm and the lock nut 

Limiters, Replacing|Page 12405 > < Tilt Wheel Handle|Service and Repair|Page 12400