S60 L5-2.4L VIN 64 B5244S6 (2003)
Steering Wheel: Adjustments
Adjusting the Position of the Steering Wheel
Adjusting the position of the steering wheel
Special tools:
998 8695 TEST DEVICE See: Tools and Equipment/998 8695 Test Device
Caution! Cars with DSTC systems. When working on the steering or wheel alignment, the adaptation of the steering wheel angle must be set to
zero using the diagnostic tool. Test drive. See Test Drive Form (DSTC (dynamic stability and traction control) /brake control module),
description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Test Drive Form (DSTC (Dynamic Stability And Traction Control) /Brake Control Module), Description.
Checking the steering wheel position
-
Drive the car straight forward and check that the steering wheel is in the "straight ahead" position
-
If the steering wheel position is incorrect adjust as follows.
Adjusting the steering wheel position
Remove the steering wheel
-
Remove the driver's airbag module. See Airbag driver and passenger (SRS), replacing See: Restraint Systems/Air Bag Systems/Air Bag/Service
and Repair.
-
Remove the locking screw from the ""parking hole"" in the steering wheel. Install the screw in the contact reel.