S60 L5-2.4L VIN 64 B5244S6 (2003)
Carefully lower the rear suspension approximately 50 mm.
Remove:
-
the three hoses on the EVAP canister.
Applies only to All-wheel drive (AWD):
-
Remove the shock absorber from the link arm on both sides.
Applies to all models:
-
Lower the sub-frame fully.
Removing the wheel spindle
Remove:
-
the screw for the control arm outer mounting
-
the screw for the outer mounting for the lower control arm
-
the screw for the rear mounting for the lateral link
-
the screw for the outer mounting for the tie rod
-
the screw for the outer mounting drive shaft.
