S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove
-
the plastic nut for the fender liner. Bend the fender liner out of the way.
Drill out the heat deflector plate rivet on the sub frame left rear bushing.
Remove the sub-frame
Position a lifting table under the sub-frame.
Remove
-
the four sub-frame mountings
-
the sub-frame brackets screws
-
the brake hose mounting stays from mountings on the brackets
-
the brake pipes from the plastic clips on the brackets.
Note: Remove the fuel filter bracket on the right bracket.
Carefully lower the sub-frame.
Remove components from the sub-frame
Note: The lateral link, tie rod, lower control arm and wheel spindle are removed from the sub-frame as one unit.