S60 L5-2.4L VIN 64 B5244S6 (2003)
Note: Check that the sealing ring is not worn or damaged. Replace if necessary. Ensure that the sealing ring is correctly positioned on the drive shaft.
Clean the splines on the drive shaft.
Turn in the wheel spindle and locate the drive shaft in the hub.
Install drive shaft screw and finger-tighten.
Lubricate the screw.
-
Loosely install both the screws retaining the spring strut in the wheel spindle. Use new screws and nuts
-
the tie rod end onto the wheel spindle. Use a new nut. Tighten to 70 Nm.
