S60 L5-2.4L VIN 64 B5244S6 (2003)
Applies only to All-wheel drive (AWD):
Tension the rear suspension to the normal position. See Normal position See: Service and Repair/Procedures.
Does not apply to AWD:
Install tensioner and tension the rear suspension to the normal position. See Tensioner, instructions for use, M66, TF-80SC, AW55-50/51SN, M56 See:
Service and Repair/Removal and Replacement/Tensioner, Instructions For Use.
Applies to all models:
Tighten the screws for the lateral link. Tighten to 80 Nm.
Install:
-
the brake disc
-
the brake caliper. Use new screws. Tighten to 50 Nm
-
the brake line bracket
-
the wheel. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Check/adjust the wheel alignment. See: Wheel alignment, checking / adjusting See: Alignment/Service and Repair.
