S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove and hang up the engine block heater (if applicable) on the left front mounting for the sub-frame
-
Position a lifting table under the sub-frame
-
Remove the screws holding the sub-frame brackets to the bodywork on both sides
-
Remove the four screws from the sub-frame
-
Carefully lower the sub-frame.
Note! Ensure that the steering gear screws are released from the sub-frame.
Hang the steering gear from a hook999 5045 COMPRESSION HOOK See: Tools and Equipment/999 5045 Compression Hook so that the lower
steering shaft does not come apart.
On right-hand drive cars the hook is installed on the right-hand side.
Installation
Transferring components
