volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Subframe|Page 13009 > < Front Subframe|Page 13007
Page 13
background image

2050 Bevel Protractor.

Note! Use new screws and nuts.

-

the fender liner and the splash guard with both the plastic nuts.

-

the four nuts and screws holding the steering gear. Use new nuts and new screws. Tighten to 50 Nm.

Clip the cable in position.
The nut (A), holding the lower half of the collision protection. (Applies only to right-hand drive cars). Tighten to 50 Nm.

Front Subframe|Page 13009 > < Front Subframe|Page 13007