S60 L5-2.4L VIN 64 B5244S6 (2003)
Only S60
Fold back the rear side panel.
Install the clip for the rear side panel.
Fold the rear seat back into place.
Applies to all models
After replacing shock absorbers, the Suspension Module (SUM) must be calibrated.
Spring/Shock Absorber Rear, Replacing
Spring/shock absorber rear, replacing
Special tools:
951 2911 Hydraulic piston See: Tools and Equipment/951 2911 Hydraulic Piston
951 2912 Claw See: Tools and Equipment/951 2912 Claw
951 2913 Claw See: Tools and Equipment/951 2913 Claw
999 5500 SOCKET UPPER NUT REAR SHOCK ABSORBER See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing components
Only V70
-
Remove the front floor hatch from the cargo compartment
-
Angle up the insulation panel
-
Remove the screw and washer
-
Raise the vehicle.
