S60 L5-2.4L VIN 64 B5244S6 (2003)
Measure the lateral run out
Put the test gauge point against the hub flange as illustrated.
Rotate the hub gently. Use a socket to help.
Note the test gauge run-out.
Hub maximum lateral runout: 0.020 mm.
If lateral run-out exceeds the value, replace the hub.
Finishing work
Remove the test equipment
Install:
-
the brake disc. Tighten the locating pin. Tighten to 8 Nm.
-
the brake caliper and the caliper holder. Tighten to 100 Nm.
Note: Use new mounting screws.
Install the wheel
Installing wheels