S60 L5-2.4L VIN 64 B5244S6 (2003)
Seals and Gaskets: Service and Repair
Sealing Rings Connecting Socket, Replacing
Sealing rings connecting socket, replacing
Special tools:
999 5777 Extractor See: Tools and Equipment/999 5777 Extractor
999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used With Hydraulic
Pump -5576
999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic Pump
999 2615 Hydraulic pump See: Tools and Equipment/999 2615 Hydraulic Pump
999 7181 Drift See: Tools and Equipment/999 7181 Drift
999 7182 Drift See: Tools and Equipment/999 7182 Drift
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing bevel gear
Remove the bevel gear.
Carry out corrective action at worn splines in the sleeve
Cut out a -40 mm cardboard disc and use it to prevent swarf entering the gearbox. Apply a thick bead of grease or petroleum jelly on the seal in the
sleeve. Press the cardboard disc against the seal.
