S60 L5-2.4L VIN 64 B5244S6 (2003)
Move the gear selector to position P.
Turn the lever on the transmission to position P (the foremost position).
Check that P position is engaged: Try to roll the car.
Detach the lock tab on the cable. Pull it straight up slightly. Use flat nosed pliers.
Install the cable in the bracket and on the lever on the transmission. Fold the locking down.
Press the locking tab into place on the cable.
Checking the shift positions
Check the shift positions. See Printed circuit board gear selector assembly/top panel Geartronic, replacing, B5254T2, AW55-50/51SN See: Shifter
A/T/Service and Repair/Printed Circuit Board Gear Selector Assembly/Top Panel Geartronic, Replacing.
Installing service clips
