S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the gear selector assembly to the bodywork. Tighten to 25 Nm
-
the cable to the gear selector. Secure the cable with the catch
-
the cable to the end of the gear selector assembly
-
the key lock cable to the gear selector assembly. Place the cable in the extracted locking sleeve.
Installing the gear selector assembly stop
Install the gear selector assembly stop. See Printed circuit board gear selector assembly/top panel Geartronic, replacing, B5254T2, AW55-50/51SN See:
Printed Circuit Board Gear Selector Assembly/Top Panel Geartronic, Replacing.
Installing the top panel on the gear selector assembly
Install the top panel. See Printed circuit board gear selector assembly/top panel Geartronic, replacing, B5254T2, AW55-50/51SN See: Printed Circuit
Board Gear Selector Assembly/Top Panel Geartronic, Replacing.
Installing gear selector knob
Install the gear selector knob. See Gear selector knob, Geartronic, replacing, B5254T2, AW55-50/51SN See: Gear Selector Knob, Geartronic, Replacing
.
Initial setting of the key lock cable (adjusting)
