volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Drivetrain - Rear Differential Leaking And Resealing|Page 7562 > < Drivetrain - Rear Differential Leaking And Resealing|Page 7560
Page 11
background image

-

Remove the right-hand side panel. First remove the cover and the screw at the front edge

-

Pull the top edge of the panel out until the clips release

-

Fold the panel inwards. Lift the panel out.

Illustration B applies to cars with an auxiliary rear facing seat

-

Remove the right-hand side panel. First remove the cover and the screw from the front edge

-

Pull the top edge of the panel out until the clips release

-

Pull the seat belt out of the holder (1)

-

Remove the safety cover. First bend out the hooks on the underside. Pull the cover straight up

-

Fold the panel inwards. Lift the panel out.

Connection and finishing work

Note! Check that the correct end of the antenna cable is routed to the radio tray.

-

Route the antenna cable up between the front air duct (1) and the firewall stay (2)

-

Route the cable through the radio compartment

-

Secure the cable in the stay (3). Use a tie strap from the kit

Drivetrain - Rear Differential Leaking And Resealing|Page 7562 > < Drivetrain - Rear Differential Leaking And Resealing|Page 7560