volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

M/T - 1st/Reverse Gear Difficult to Engage|Page 8158 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8156
Page 1
background image

Shift Cable: Adjustments

 

Transmission cable, adjusting 

Special tools: 999 7077

Note:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Preparatory work 
Ignition off.

Removing engine compartment components 

Remove the air cleaner housing ACL assembly with the intake pipe. Pull the Air Cleaner (ACL) housing out of its mountings.

Adjusting the mechanical cable 

Remove the ball joint for the outer cable from the side lever. Use jimmy tool 999 7077. 
Release the adjuster on the cable.
Check that the gear selector lever is in neutral.

M/T - 1st/Reverse Gear Difficult to Engage|Page 8158 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8156