S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove the panel (the pen holder) between the dashboard center console and the center console.
Pry out the panel at both ends. Use a weatherstrip tool.
Pull the panel straight out.
Removing the panel for the gear selector lever boot from the center console
Press in the catches. Angle up the panel at the front edge.
Lift the panel out of the rear mountings.
Removing the lock bracket from the gear selector
Lift the boot over the gear selector lever to access the lock bracket.
Note: The bracket is integrated in the boot.
Remove the lock bracket.
Press in the two catches under the boot. Pull the sleeve downwards.
Removing the gear selector lever knob