S60 L5-2.4L VIN 64 B5244S6 (2003)
Insert a spacer between the bodywork and the sub-frame at the front left-hand mounting. There must be a distance of approximately 55 mm.
Cleaning
Use compressed air to blow clean the area around the control system cover. Carefully clean the sub-frame by the cover to prevent dirt entering the
transmission.
Remove the screws for the control system cover.
Clean any sealing compound from the threads. Use a tap, M8x1.25.
Detach the cover. Use:999 5477 JOINT WEDGE See: Tools and Equipment/999 5477 Joint Wedge. Carefully tap it in between the cover and
transmission so as not to bend the seal flange on the cover.
