S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Lower the rear side window to its lowest position.
-
Position the mounting plates between the door panel and the weatherstrip as illustrated.
Ensure that the position of the mounting plates corresponds to the mountings on the sun blinds.
Installing the sun blind
-
Take out the sun blind. There is a decal on the sun blind that indicates whether it is intended for the left (LH) or right (RH) window.
-
Remove the backing from the pieces of tape.
-
Ensure that the sun blind is against the front door post (1) before pressing the sun blind down and against the door panel.
-
The mounting for the sun blind must be inserted and pressed down between the mounting plate and the door panel using a twisting movement as
illustrated. Do NOT press down vertically only.
Press the sun blind down against the door panel until a click is heard. The lower edge of the sun blind mountings must grip around the edge of the door
panel as illustrated.
-
Remove the mounting plates.
-
Check that the sun blind is against the door panel. If the sunblind is not against the door panel, press the sun blind down further.
