S60 L5-2.4L VIN 64 B5244S6 (2003)
Apply adhesive.
The adhesive bead must be 6 mm wide 12 mm high.
Note! Mount the windshield within 10 minutes.
Install the windshield.
Install:
-
the guide molding at the lower edge
-
the plenum chamber cover.
-
the wiper arms
-
the rain sensor. See: Rain sensor See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Rain Sensor/Service and Repair.
Note! Park the car on an even surface. Cure for three hours at a minimum temperature of +5°C otherwise apply extra heat.
