S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the soft nose on the right-hand side. See Bumper, front, replacing See: Body and Frame/Bumper/Front Bumper/Service and Repair.
-
Remove the screws for the soft nose guide. See Bumper, front, replacing See: Body and Frame/Bumper/Front Bumper/Service and Repair
-
Disconnect the connector under the reservoir
-
Remove the screws from the reservoir
-
Carefully tension out the soft nose. Release and pull out the reservoir slightly
-
Remove the air intake pipe for the control module box from the mounting on the reservoir
-
Take down the reservoir.
Installation