S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Connect the connectors
-
Tighten the screws. Tighten to 20 Nm. Start with the outer screw (closest to the front fender)
-
Install the panel over the wiper mechanism
-
Reset the wiper motor and mechanism by switching on the ignition and then turn the wiper switch on and off
-
Install the wiper arms. See Wiper arm / blade, windshield, replacing See: Wiper Arm/Service and Repair.
Other information
To adjust the control arms. See Control links / wiper mechanism, adjusting See: Adjustments.
