S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Activate the reset button on the turn signal lamp switch. Read off the status.
Hint: If the read and reset button status is OK, the fault is in the turn signal lamp switch.
Was the status of the read and reset button correct?
Yes - Fault Found
no - Replacing the component
-------------------------------------------------
Replacing the component
Try replacing the steering wheel module (SWM).
Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.
Other information:
-
To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Relays and Modules/Relays and
Modules - Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair.
Was a fault detected?
Yes - Fault Found
No - No Fault Found
-------------------------------------------------