S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Pull up the head restraint to its highest position.
Insert a 3.5 mm (0.138 in) diameter drift in the hole in the sleeve (left-hand side only).
Press and lift the head restraint from the sleeves.
Pull the head restraint straight up.
Install:
Insert the head restraint slightly into the sleeves.
Press the head restraint down to the lowest position.
Pull it up again.
Note! Check that the tensioner spring works.
Central Head Restraint Sleeves
Central head restraint sleeves
Replacing central head restraint sleeves
Carry out Upholstery back rest, replacing See: Seat Cover/Service and Repair/Rear Seat, Passenger Seat/Upholstery Back Rest, Replacing.
Insert a hand and release the sleeve interlock.
Pull the sleeve up at the same time.
Replace the sleeve.
Press down the new sleeve.
Straighten the upholstery.
Carry out Upholstery back rest, replacing See: Seat Cover/Service and Repair/Rear Seat, Passenger Seat/Upholstery Back Rest, Replacing
Head Restraint Sleeves
Head restraint sleeves
Removing head restraint sleeves